Basic Operations; Playing The Keyboard; Selecting A Tone - Casio CTK-230 User Manual

Basic Operations

POWER/MODE
This section provides information on performing
basic keyboard operations.

Playing the Keyboard

To play the keyboard
1
Set the POWER/MODE switch to NORMAL.
2
Use the MAIN VOLUME buttons to lower
the keyboard volume.
• It's always a good idea to set the keyboard
volume at a relatively low level before
playing.
• Pressing [ ] or [ ] causes the current
volume setting to appear on the display.
Press [ ] or [ ] again to change the setting.
3
Play something on the keyboard.

Selecting a Tone

This keyboard comes with 100 built-in tones. Use
the following procedure to select the tone you want
to use.
To select a tone
1
Find the tone you want to use in the tone
list and note its tone number.
• Not all of the available tones are shown on
the tone list printed on the keyboard
console. For a complete list, see the "Tone
List" on page A-1.
277A-E-019A
CTK230_E08_18.p65
MAIN VOLUME
2
3
NOTE
• Always input both digits for the tone number,
• You can also increment the displayed tone
• Sound effect tones such as 77 VEHICLE
17
TONE
[+]/[-]
Press the TONE button.
Appears when TONE button is pressed
P i a n o 1
Use the number buttons to input the two
digit tone number for the tone you want to
select.
Example: To select "26 WOOD BASS", input
2 and then 6 .
W o o d B a s s
• Now notes played on the keyboard will be
played using an acoustical wood bass
sound.
including a leading zero (if any). If you input
one digit and stop, the display will
automatically clear your input after a few
seconds.
number by pressing [+] and decrement it by
pressing [–].
sound best when you keep a keyboard key
depressed.
03.10.7, 2:01 PM
Number buttons
E-17