Epson BrightLink 455Wi User Manual page 146

note
You must be projecting an
image for the button
Auto
to have any effect. It works
only with computer images
projected through the
Computer (Component
port.
Video)
Solving Problems
146
The image is blurry.
■ There may be dirt or smears on the projection window. Clean the
window as described on page 124.
Adjust the focus using the focus lever (see page 42).
■
■ Lower the projection angle to reduce the amount of keystone
correction required.
■ If you're projecting from a computer, you may need to adjust the
tracking and sync settings as described in the next section.
You see vertical bands or the image still looks blurry after
trying the solutions in the previous section.
■ If you're projecting from a computer and displaying an image that
contains a lot of fine detail, you may notice vertical bands or some
of the characters may look heavy or blurred. Press the
button on the remote control or the
projector to reset the projector's Tracking, Sync, and Position
settings.
If further adjustment is needed, you can fine-tune the
■
and settings manually using the Signal menu, as described
Sync
on page 88.
1. Fill the screen with an image containing fine detail, such as a
pattern to appear as your desktop background, or try
projecting black text on a white background.
2. Adjust the
Tracking
button on the
Enter
to eliminate vertical bands.
Auto
Tracking