Advertisement
Using your machine
Using your window vacuum
Remove the spray bottle
Pull the trigger to spray
head by turning anticlock-
water onto the surface to
wise. Fill the spray bottle
be cleaned.
with water.
Turn on the window vacuum
Vacuum up the water using
by pressing and holding the
slow, straight, downwards strokes.
Ensure that the squeegee has
the window vacuum simply
good contact with the surface by
keeping the window vacuum as
parallel to the surface as possible.
NOTE:
the cleaner after each use. The cleaner should not be stored for more than two months without being recharged.
WARNING!
Never operate the cleaner if the water level in main waste water tank exceeds the Max line, or if there
is water in the secondary waste water tank. Empty the waste water tanks before continuing to use the cleaner.
NOTE: You may need to
press the trigger a few
is dispensed, this clears
air from the system.
Wipe the surface with the
spray bottle.
Taking care of your machine
NOTE: The window vacuum and spray bottle must be emptied after each use. Do not store water in the window
vacuum and spray bottle between usage.
After every use
Remove the spray bottle
Gently pull the waste water
head by turning anticlock-
tank plugs on the window
wise and empty the bottle
vacuum and ensure each
after each use.
waste water tank is empty
after each use.
Remove the suction head
and wash the squeegee
under running water (Max
40°C) to remove dirt and
debris. Wipe the squeegee
with a damp cloth to
remove any excess water.
Advertisement
