Dirt Devil DDW03-E01 User Manual
  1. Manuals
  2. Brands
  3. Dirt Devil Manuals
  4. Vacuum Cleaner
  5. DDW03-E01
  6. User manual

Dirt Devil DDW03-E01 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

CARPET
WASHER
Model # DDW03-E01
USER GUIDE

Advertisement

Table of Contents
loading

Related Manuals for Dirt Devil DDW03-E01

Summary of Contents for Dirt Devil DDW03-E01

  • Page 1 CARPET WASHER Model # DDW03-E01 USER GUIDE...
  • Page 2 WARnInG BASIC SAFETY PRECAUTIONS This carpet washer is intended for given supervision or instruction household use only and NOT for concerning use of the appliance commercial or industrial use. in a safe way and understand the hazards involved. Children shall not • Only use the carpet washer play with the appliance. Cleaning indoors and keep the area you’re and user maintenance shall not cleaning well lit. be made by children without • Keep fingers, hair and loose supervision. clothing away from moving parts • Before using the carpet washer and openings whilst using the test your carpets/rugs/upholstery carpet washer. for colourfastness and pile • This appliance can be used by distortion. children aged from 8 years and • Only Dirt Devil recommended above and persons with reduced...
  • Page 3 WARnInG DON’TS CONTINUED... • Don’t use your carpet washer to • Don’t use the carpet washer with pick up hot coals, cigarette butts, incorrect voltage as this may result matches or smoking hot burning in damage or injury to the user. items or use in an area where The correct voltage is listed on the there may be harmful fluids ratings label. (chlorine, bleach, and ammonia drain cleaner). DO’S • Check with the manufacturer of • Always keep the power cord away your flooring prior to using the from the brushes while in use carpet washer to ensure • Use only CE approved 13amp its suitability. extension cords, non-approved • The clean water tank should be extension cords may overheat. filled with warm water (max 40C) Care should be taken to arrange only. Filling the clean water tank the extension cord as it can be a with hot or boiling water will trip hazard. damage the machine and invalidate • Always use the carpet washer with the guarantee. all water/solution tank and filters • Always vacuum your carpets in place. thoroughly before using the • Keep all openings clear and free carpet washer.
  • Page 4 HI. WElCOmE. Congrats on purchasing your new Dirt Devil Carpet ® Washer. Inside, you’ll find everything you want to know from the quick start guide to how to. So what are you waiting for? lET’S gO. ™ PRODUCT REgISTRATION Be sure to register your product at www.dirtdevil.co.uk Hint: Attach your sales receipt to this User Guide. Verification of date of purchase may be...

  • Page 5: Table Of Contents

    TABlE OF CONTENTS Preparing the carpet Quick Start Assembly How to Fill the water/solution tank Wash and rinse your carpets Use Max Extract Function Use the Power Scrub and upholstery wash tool Empty the dirty water tank Clean the base lint filter Clean the nozzle Remove blockages from the Power Scrub brushes Maintain Power Scrub brushes...
  • Page 6 1. Vacuum carpet thoroughly 2. Place plastic or foil under with a Dirt Devil vacuum. and around the legs of ® furniture until the carpet has completely dried. HElPFUl HINTS FOR ClEANINg CARPET • Plan your route so you • Do not oversaturate your don’t walk over previously carpet with cleaning cleaned areas.

  • Page 7: After Cleaning

    CAUTIon CAUTIon Do not use the carpet cleaner as a Do not store the carpet cleaner in garage dry vacuum. or area where unit could freeze. AFTER ClEANINg • Allow carpet to dry • If the carpet is not dry and completely. Try not to walk the furniture must be placed on the carpet until it is dry.
  • Page 8 TEST FOR COlOUR FASTNESS Wet a white absorbent cloth with the IMPORTANT: Your dirty water tank solution. In a small hidden area of your is fitted with a float. When the dirty carpet/rugs /upholstery gently rub with water tank is full, or the nozzle is not the dampened cloth.

  • Page 9: Fill The Water/Solution Tank

    CAUTIon CAUTIon To reduce the risk of fire, electric shock, or injury: To reduce the risk of damage: Do not use this FIll THE WATER/SOlUTION TANk ensure the power cord is out of the way before carpet washer on hard floors. Using this machine attaching the upper handle.
  • Page 10 CAUTIon Avoid saturating your carpet, do not use more than 4 wet strokes over one area. Always end with dry strokes. For heavily soiled areas, it may be necessary to repeat the cleaning process. Make crisscrossing strokes WASH YOUR CARPETS to the original pattern and overlap each pass.
  • Page 11 RINSE YOUR CARPETS Rinsing is not necessary, but will help remove solution residue leaving your carpets looking fresher. 1. Select RInSE on the 2. Squeeze trigger to 3. Squeeze trigger on mode selector switch release water. forward stroke, release trigger on backward stroke to recover water.

  • Page 12: Use The Power Scrub And Upholstery Wash Tool

    USE THE POWER SCRUB AND UPHOlSTERY WASH TOOl 1. Lift cover on hose connection port. 2. Line up tabs on hose into hose connection port. Push and twist hose clockwise to lock into place. 3. Line up solution tube connector with solution tube connection port.
  • Page 13 CHOOSE AN ACCESSORY 1. Choose an 2. Slide accessory tool 3. Press the on/off button accessory. over tab at end of hose to switch on. Select WASH until it clicks into place. on mode selector switch (no water/solution will be delivered on RInSE mode).

  • Page 14: Empty The Dirty Water Tank

    CAUTIon Always switch off and unplug the carpet washer from the mains before assembling, filling and emptying the clean water tank, emptying the dirty water tank or before connecting or disconnecting the attachments. EmPTY THE DIRTY WATER TANk 3. Lift dirty water tank 1.

  • Page 15: Clean The Base Lint Filter

    CAUTIon Always unplug the carpet washer before performing any maintenance/troubleshooting checks. All water and solution must be removed from tanks. ClEAN THE BASE lINT FIlTER 2. Pull filter to remove. 1. Lie carpet washer on its 3. Rinse filter under back.

  • Page 16: Remove Blockages From The Power Scrub Brushes

    REmOvE BlOCkAgES FROm THE POWER SCRUB BRUSHES 1. Lie carpet washer on its back. 2. Firmly pull sides of Power Scrub cover to remove. 3. Remove any threads or hair caught 4. Leave to fully dry. Line up tabs around the brush, rinse under water on side of Power Scrub cover into to remove debris.

  • Page 17: Maintain Power Scrub Brushes

    mAINTAIN POWER SCRUB BRUSHES 1. Pull firmly to unclip each side 2. Remove individual brushes, clean of Power Scrub cover (one side at and rinse under running water to a time). remove debris. 3. Refit the individual brushes. Line 4. Leave to fully dry. Line up tabs up tabs on Power Scrub cover with on side of Power Scrub cover with tabs on brush frame.
  • Page 18 If a minor problem occurs, it usually can be solved quite easily when the cause is found by using the checklist below. If not please call the Customer Care Line on 0330 026 2626. CAUTIon TO REDUCE THE RISk OF PERSONAl INjURY - UNPlUg BEFORE ClEANINg OR SERvICINg. Problem Possible Solution Why won’t the It may not be plugged into the mains correctly: ensure that the plug is carpet washer turn pushed in securely and switched on.

  • Page 19: Limited Guarantee

    LIMITED GUARAnTEE It’s quick and easy to register for your free 1 year guarantee online at www.dirtdevil.co.uk. Monday-Friday 9am-5pm Please retain your original receipt for proof of purchase. Please make a note of the serial number and model number of the product before calling.
  • Page 20 EEC Statement of Compliance: Manufacturer/EEC importer: Vax Limited trading as Dirt Devil, hereby on our own responsibility, declare that the DDW03-E01 series is manufactured in compliance with the following Directives: Safety: 2006/95/EC Low Voltage Directive. EMC: 2004/108/EC Electromagnetic Compatibility Directive Waste electrical products should not be disposed of with household waste.

Table of Contents