Lantronix X300 Quick Start Manual

X300 Quick Start Guide
!
Thank you for choosing Lantronix. Please register your product to receive notifications for firmware and
documentation updates at www.lantronix.com/product-registration.
X300
Model shown: X300F202S
HARDWARE OVERVIEW
Ethernet LAN
Wi-Fi
HARDWARE SETUP
1. Unbox and verify the contents.
2. Attach each Wi-Fi and Wi-Fi / Bluetooth antenna to its antenna
connector and tighten it securely.
3. Connect the accessory power adapter and power on the device.
4. Wait for the device to boot. The green POWER LED light will be on.
guides
Quick
Start
Front View
RS-232
Reset
Wi-Fi / Bluetooth
DC input
WHAT'S IN THE BOX
Accessory
Power supply
Wi-Fi / Bluetooth antenna
For additional accessories, visit
https://www.lantronix.com/products/x300-series/
LEDs
ALERT
Wi-Fi
POWER
1
IoT Cellular Gateway
Part number
ACC-520-0165-00
A21H0
Back View
microSD card
(not provided) slot
LEDs
OFF: No alert
Red Blinking: Linux kernel booting
ON: Hardware fault
OFF: Wi-Fi network is active
Blue Blinking: Wi-Fi network connection traffic
ON: Wi-Fi network link is up and active
OFF: Power off
Green
ON: Power on
quantity
1
2
SIM 1