All information and setting in Computer Setup are accessed from the File,
Security, or Advanced menus. The items on each of these menus are
described in this section.
To use Computer Setup:
Turn on or restart the computer.
1.
When the blinking cursor appears in the upper-right corner of the
2.
screen, press F10.
To change the language, press F2.
3.
To view navigation information, press F1.
4.
To return to the Computer Setup menu from anywhere in Computer
5.
Setup, press ESC.
Select the File, Security, or Advanced menu.
6.
To close Computer Setup and restart the computer:
7.
Select File->Save->Changes and Exit, then press Enter.
Select File->Ignore Changes and Exit, then press Enter.
When you are prompted to confirm your action, press F10.
8.
Use the following table as a reference in making selections from the File
File Menu
Selections
System information
Save to floppy
Restore from floppy Restore system configuration from a diskette
Restore defaults
Ignore changes and
exit
Save changes and
exit
Selecting from the Security Menu
Use the following table as a reference in making selections from the Security
Security Menu
Setup password
Power-on password
Using Computer Setup
Selecting from the File Menu
Menu.
Allows viewing of identification information about
your computer, a docking base, and battery packs.
Save system configuration to a formatted diskette.
Replace configuration settings in Computer Setup
with factory default settings (identification
information is retained).
Cancel changes entered during the Computer Setup
session, then exit and restart the computer
Save changes entered during the current Computer
Setup session, then exit and restart the computer
Menu.
Selections Resulting Action
Enter, change, or delete a setup password
Enter, change, or delete a power-on
password.
Resulting Action