Lap Times; Timer; Using Casio Watches To Configure Timer Settings; Setting The Countdown Start Time - Casio 5707 Operation Manual

Lap Times

A lap time is the time elapsed during a specific
lap or segment. Lap times are recorded
internally by the watch. The watch displays the
elapsed time of the current lap.
E
Start
Lap 1
E
Lap 2
E
Lap 3
A
Goal
Note
Lap times can be viewed with CASIO
●
WATCHES after measurement is
complete.
Viewing Stopwatch Data
l
Watch Operation Guide 5707
The timer counts down from a start time
specified by you. A beeper sounds when the
end of the countdown is reached.
The beeper is muted when battery power is
●
low.
Using CASIO WATCHES to
Configure Timer Settings
If the watch is paired with a phone, you can
also use the CASIO WATCHES phone app to
set the timer start time.
Configuring Watch Settings
l
Setting the Countdown Start
Time
The countdown start time can be set in 1-
second units up to 24 hours.
If a timer countdown operation is in
●
progress, reset the timer to its current start
time before performing this operation.
Using the Timer
l
1.
Enter the Timer Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
Release the button when the hour setting
starts to flash.
This is the setting mode. The hands
●
automatically shift out of the way for
easy viewing of the display and other
indicators.

Timer

Hours
3.
Use (B) and (E) to change the timer hours
setting.
Holding down (B) or (E) scrolls through
●
settings at high speed.
4.
Press (D).
This causes the minutes digits to flash.
Minutes
5.
Use (B) and (E) to change the minutes
setting.
6.
Press (D).
This causes the seconds digits to flash.
Seconds
7.
Use (B) and (E) to change the seconds
setting.
8.
Press (A) to exit the setting screen.
Note
Setting a start time of [0:00'00]
●
performs a countdown of 24 hours.
While the setting is being configured,
●
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
24