Sekonic C-800 Operating Manual page 5

A protective sheet is attached to the LCD. Peel it off before use.
Although the LCD monitor is manufactured to very high standards, it is possible to
the meter.
Our company shall not be liable for any data loss caused by, but not limited to,
malicious acts and control errors.
damaged.
Do not store the meter in areas of high temperature of high humidity, as the meter
will be damaged.
Be careful not to transport the meter from cold to warm moist conditions as
condensation will form on the meter and may damage it.
If the meter is operated in temperatures below -10°C, the response of the LCD will
will return to its normal condition.
If the meter is left in direct sunlight, a vehicle, or near a heater, the unit's
temperature will rise and may result in damage. Please be careful when using the
meter in these types of locations.
If the meter is left where corrosive gases may be generated, the gases may affect
the product and may result in damage. Please be careful when using the meter in
these types of locations.
In case of disposing the meter, follow the rules of disposal in your area.
Maintenance Notes
Be careful not to let the Light Receptor become dusty, dirty, or scratched as this
may affect the precision of the measurement.
If the meter becomes dirty, wipe it with a dry, soft cloth. Never use organic solvents
such as thinner or benzine.
For used batteries, dispose of them according to the rules of your area.
Insulate plus and minus terminals with tape or other insulation material.
Do not disassemble the batteries.
iii