Epson SureColor S30670 Quick Reference Manual page 29

| Cleaning the Print Head, Wiper, Caps, and Wiper Rail
28
Clean the attachment points, then place the wiper on the points and press it down until it clicks into
8.
place.
Clean the area around the outside of the four caps with a cleaning swab, as shown below.
9.
Caution: Do not touch the insides of the caps, or they might become deformed.
Press the button to move the wiper to the rear. Make sure you see this message on the display:
OK
10.
Clean wiper rail.
After cleaning, close
maintenance covers and
press OK.