Package Contents - Stanley STPT600 Original Instructions Manual

7.5
Voltage Amperes
110-127 0 - 2.0
2.1 - 3.4
3.5 - 5.0
5.1 - 7.0
7.1 - 12.0
12.1 - 20.0
220-240 0 - 2.0
2.1 - 3.4
3.5 - 5.0
5.1 - 7.0
7.1 - 12.0
12.1 - 20.0
LABELS ON TOOL
The label on your tool may include the following symbols:
WARNING! To reduce the risk of injury, the user
must read the instruction manual before use.
Wear safety glasses or goggles.
Wear ear protection.
V Volts
A Amperes
Hz Hertz
W Watts
min minutes
Alternating
/min.
Current
Position of date code
The date code, which also includes the year of manufacture,
is printed into the housing.
Example:
2017 XX JN
Year of manufacturing
Cable length (m)
15 25 30 45
Cable rated current (Ampere)
6 6 6 6 6
6 6 6 6 15
6 6 10 15 20
10 10 15 20 20
15 15 20 25 25
20 20 25 - -
6 6 6 6 6
6 6 6 6 6
6 6 6 6 10
10 10 10 10 15
15 15 15 15 20
20 20 20 20 25
Direct Current
n No-Load Speed
0
Class II Construction
Earthing Terminal
Safety Alert Symbol
Revolutions or
Reciprocation per
minute

PACKAGE CONTENTS

60
The package contains:
1 Blower
1 Tube
10
1 Dust bag
15
1 Instruction manual
20
• Check for damage to the tool, parts or accessories which
may have occurred during transport.
25
• Take the time to thoroughly read and understand this
-
manual prior to operation.
-
FEATURES (Fig A)
6
This tool includes the following features:
1. Nozzle
6
2. Blast port
15
3. Trigger switch
4. Variable speed Knob
15
5. Lock-on button
20
6. Suction port
7. Dust bag
-
ASSEMBLY
WARNING! Before assembly, make sure that the
tool is switched off and unplug.
USE
Mounting the nozzle for blowing operations (Fig A)
• Insert the pin located inside the nozzle into the notch
provided on the blast port (1)
• To lock nozzle in place, turn the nozzle in the direction
indicated.
• To remove nozzle, turn the nozzle in the opposite
direction.
Mounting the nozzle and dust for dustcollection (Fig B)
• For dust collection, mount the dust bag at the blast port (2)
and nozzle at the suction port (6)
• To remove dust bag and nozzle, simply pull out by first
turning in the opposite direction.
• Empty the dust bag frequently to ensure maximum dust
collecting efficiency.
Operating the blower (Fig C)
• To switch your blower on, depress the switch (3). To stop
your blower, release switch.
• Adjust variable speed knob (4) for different speed
requirement.
• When continuous operation is required, first depress the
switch and then the lock-on button (5) and release to
disengage lock, squeeze and release switch.
WARNING: Continuous running of machine should
not exceed 30 minutes.
Replacing carbon brushes (Fig D)
• Use a screwdriver to remove the brush holder cap.
• Take out the worn carbon brush, insert the new one and
secure the brush hold cap.
ENGLISH
(Original instructions)
5