Download Print this page

3M Aura 9300+ Series Technical Data Sheet page 4

Particulate respirators

Advertisement

3M
Personal Safety Division | 3M
Removal Instructions
See Step 3 of Fitting Instructions and place hand over the
respirator to maintain position on the face. Pull the bottom
strap over your head. Still holding respirator in position, pull
the top strap over your head and remove the respirator.
Disposal
Used respirators should be disposed of in accordance with
relevant national regulations
Materials
The following materials are used in the production of the 3M
Aura
Particulate Respirator 9300+ Series respirators:
Straps
Staples
Nose Foam
Nose Clip
Filter
Valve*
Valve Diaphragm
*9312+ and 9322+ models only
This respirator does not contain components made from
natural rubber latex.
Maximum mass of products:
Unvalved (9310+, 9320+) = 10 gm
Valved (9312+, 9322+) = 18 gm
Warning
Selection of the most appropriate respiratory protective equipment (RPE) will depend on the particular situation and should be made only by a
competent person knowledgeable of the actual working conditions and the limitations of RPE. Details regarding performance and limitations are
set out in this technical bulletin as well as on the respirator packaging and user instructions. Before using any respirator, the wearer must read and
understand the user instructions for the product. Specific legislation must be observed. If in doubt, contact a safety professional or 3M.
Important Notice
To the extent permitted by law, 3M shall not be liable for any loss or damage including any loss of business, loss of profits, or for any indirect,
special, incidental or consequential loss or damage arising from reliance upon any information herein provided by 3M. Nothing in this statement
will be deemed to exclude or restrict 3M's liability for death or personal injury arising from its negligence.
Personal Safety Division
3M Australia Pty Ltd
Bld A, 1 Rivett Road
North Ryde NSW 2113
Phone: 136 136 (select option 2)
TechAssist Helpline: 1800 024 464
Email: techassist@mmm.com.au
www.3M.com/au/ppesafety
Version: 1
This version is the sole document applicable to the product(s) since its date of publication
Particulate Respirators 9300+ Series
Thermoplastic Elastomer
Steel
Polyurethane
Aluminium
Polypropylene
Polypropylene
Polyisoprene
3M New Zealand Limited
94 Apollo Drive
Rosedale, Auckland 0632
TechAssist Helpline: 0800 364 357
Customer Services: 0800 252 627
www.3M.com/nz/ppesafety
Storage and Transportation
The 3M
Aura
Particulate Respirator 9300+ Series
respirators have a shelf life of 5 years. End of shelf life is
marked on the product packaging. Before initial use, always
check that the product is within the stated shelf life (use by
date). Product should be stored in clean, dry conditions within
the temperature range: –20°C to +25°C with a maximum
relative humidity of <80%. When storing or transporting this
product use original packaging provided.
© 3M 2016. All rights reserved.
Please recycle.
3M, Cool Flow and Aura are trademarks
of 3M Company.
AV011453816

Advertisement

loading

This manual is also suitable for:

Aura 9310+Aura 9312+Aura 9320+Aura 9322+