Switching Off; Storing The Machine - Stihl TSA 230 Instruction Manual

English
► Unlock the machine by moving the locking
lever (2) to ‚
► Make sure you have a firm and secure stance
► Stand up straight – hold the machine in a
relaxed manner
► The abrasive cutting wheel must not touch any
objects or the ground
4
5
► Hold the machine with both hands – left hand
on the handlebar – right hand in the grip
area (3) of the rear handle
► Press the trigger switch lockout (4)
► Press and hold the trigger switch (5) – the
engine starts running
The engine only runs if the locking lever (2) is set
at ‚ and if the trigger switch lockout (4) and
trigger switch (5) are actuated at the same time.

16 Switching Off

► Release the trigger switch (1) and trigger
switch lockout (2)
3
54
3
2
1
► Set the retaining latch (3) to ƒ – machine is
locked so that it cannot be switched on
During breaks and after work, remove the battery
from the machine.
NOTICE
If the battery is not removed, there is the risk that
the plug-in contacts on the cut-off machine and
battery become corroded. Such corrosion can
cause irreparable damage to the cut-off machine
and battery.
16.1 Removing the battery
4
► Press both safety catches at the same time (4)
– this unlocks the battery (5)
► Remove the battery (5) from the housing
When the machine is not in use, shut it off so
that it does not endanger others.
Secure it against unauthorized use.

17 Storing the Machine

► Set retaining latch to ƒ
► Remove the battery
► Remove the abrasive wheel
► Thoroughly clean the machine, especially the
ventilation slots
► Store machine in a safe and dry place. Protect
against unauthorized use (e. g., by children)
NOTICE
If the battery is not removed, there is the risk that
the plug-in contacts on the cut-off machine and
battery become corroded. Such corrosion can
cause irreparable damage to the cut-off machine
and battery.
17.1 Battery compartment cover
(special accessory)
The cover protects the empty battery compart‐
ment against dirt.
16 Switching Off
5
4
0458-707-9821-C