Description (Fig. A) - DeWalt XR DCD1623 Original Instructions Manual

English
f
Wear eye protection
n
Visible radiation. Do not stare into light.
Do not use this tool if you or any bystanders have a
cardiac pacemaker or other medical implants.
Always use the safety chain. Secure the tool on
the workpiece.
Date Code Position (Fig. B)
The date code , which also includes the year of manufacture,
44
is etched on the inside of battery port.
Example:
Year and Week of Manufacture

Description (Fig. A)


WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
ON/OFF switch
1
Magnet engagement lever
2
Forward/reverse switch
3
Speed selector
4
Gear selector
5
Feed handle
6
Feed handle hub
7
Feed handle release
8
button
LED button
9
19 mm Weldon
10
quick‑change chuck
16 mm Keyed chuck
11
Motor height adjustment
12
lever
Coolant bottle bracket
13
Intended Use
Your DCD1623 magnetic drill press has been designed for
drilling holes in steel construction surfaces. Do not drill into
non‑ferrous metal.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
This drill press is a professional power tool.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
12
2022 XX XX
Coolant bottle
14
Coolant tube
15
Coolant coupling
16
connector
Coolant flow regulator
17
Coolant bottle cap
18
Coupler nut
19
Magnetic base
20
Magnetic coolant bottle
21
attachment point
Carry handle
22
Handle release button
23
Magnet engagement and
24
gyro protection indicator
Chip guard
25
Safety chain
26
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect battery pack
before making any adjustments or removing/
installing attachments or accessories. An accidental
start‑up can cause injury.

WARNING: Use only D
Transporting the Drill (Fig. A)

WARNING: To reduce the risk of serious personal
injury, turn tool off, and remove the battery pack,
before transporting, making any adjustments,
cleaning, repairing, or removing/installing
attachments or accessories. An accidental start‑up can
cause injury.
In order to conveniently carry the tool from place to place, a
carry handle 22 has been included on the top of the tool.
Installing the Machine (Fig. A, G)
1. Assemble the feed handle.
2. Install the chip guard.
3. Fit the lubrication system as necessary.
4. This machine features a concave base making it possible
to install on a solid surface, or a pipe with a diameter of no
less than 101 mm and a thickness of no less than 9.5 mm.
Remove any particles that will obstruct full contact between
the magnetic base 20
5. Fit and tighten the safety chain
Assembling the Feed Handle (Fig. C)
The quick‑release feed handle can be mounted in one simple
operation both to the left and the right of the machine.
1. Screw the handles into the hub
6
handles are secure.
2. Keep the hub realease button
the hub shaft into the hole
3. Release the button.
Assemble the Chip Guard (Fig. D)

WARNING: Always use the chip guard.
1. Hold the chip guard
25
the slots in the chip guard with the holes in the machine.
2. Fit the wing bolts 39 (from the accessories bag) into the
holes located in the front of the frame.
Lubrication System (Fig. A, E)
Filling the Coolant Bottle

WARNING: Do not pour cutting fluid into the bottle
while mounted in the bracket. Do not allow cutting
fluid to enter the drill motor. Electric shock may result.
WALT battery packs and chargers.
e
and the mounting surface.
26 .
. Ensure that the
7
8 depressed while inserting
33 .
in front of the tool holder, aligning