Entire Instrument (Menu Button) - Yamaha CK88 Owner's Manual

Advanced settings

Entire instrument (MENU button)

From the [MENU] button, you can configure various parameters and functions that affect the entire instrument.
The changes made here will be stored in the CK.
NOTICE
After the value has been changed, the setting will be saved when the operation goes back to the Top screen.
Changes will not be saved if the CK has been turned off before the operation has gone back to the Top screen.
Operation
1.
Press the [MENU] button.
2.
Use the VALUE buttons and Encoder dial to select an item, and then press the [ENTER] button.
NOTE
You can also use the LIVE SET buttons [1] to [6] to select the item. The LIVE SET buttons [1] to [6] correspond to the items shown on the display
in order from the top. The buttons light up when this feature is available.
3.
Use the VALUE buttons and Encoder dial to change the value, and then press the [ENTER] button.
When the setting has been changed, the operation goes back to the previous screen for selecting the menu item.
General
Function name
System Master Tune
Master EQ
Speaker
Auto Power Off
Power On Sound
36
CK88 CK61 Owner's Manual
Description
Determines the tuning for the entire instrument.
Settings:
414.72 Hz–466.78 Hz
Default:
440.00 Hz
Sets the Master EQ.
High Frequency Sets the frequency for the high band.
Settings:
500 Hz–16 kHz
Mid Frequency Sets the frequency for the mid-band.
Settings:
100 Hz–10 kHz
Low Frequency Sets the frequency for the low band.
Settings:
32 Hz–2.0 kHz
Speaker EQ Selects the optimal sound quality of the built-in speakers for setting the CK on a
keyboard stand where the bottom of the CK is open (Normal) or for setting on the table
where the bottom of the CK is covered (Table).
Settings:
Normal, Table
Default:
Normal
Speaker Mute Selects to mute the built-in speakers automatically (Auto) or to mute the built-in
speakers manually using the SPEAKERS switch (Manual) when the headphones are
connected.
Settings:
Auto, Manual
Default:
Auto
Switches the Auto Power Off function setting.
• Disable: The CK is not automatically turned off.
• Enable: The CK is turned off automatically after being inactive for 30 minutes.
• Auto: The Auto Power Off function is disabled while the AC adaptor is being used, and
enabled while batteries are being used.
Default:
Auto
Selects which Live Set Sound is automatically called up when the CK is turned on.
Default:
1-1