Epson XP-400 Start Here page 3

5
Install software
N ote: If your computer does not have a CD/DVD drive, you can
download the software from the Epson website. See "EPSON technical
support."
Caution: Be sure to close your other programs, including any screen
savers and virus protection software, before beginning this software
installation.
1
M ake sure the printer is NOT CONNECTED to your
computer.
Windows : If you see a Found New Hardware screen, click
®
Cancel and disconnect the USB cable. You can't install your
software that way.
2
Insert the product CD.
3
W indows:
If you see the AutoPlay window, click
If you see the User Account Control screen, click Yes or Continue.
Mac OS X:
® Double-click the
4
C lick Install (Windows) or Continue (Mac OS X) and follow
the instructions on your computer screen.
5
W hen you see the Select Your Connection screen, check
the "Connection options" section on this sheet for more
information.
Choose your connection. Then click Next (Windows) or
Continue (Mac OS X) and follow the instructions on your
computer screen.
Run Setup.exe.
Epson icon, if necessary
Connection options
Wireless Connection
You must install the software on every computer from which you
want to print. For the first installation, we recommend using a
USB cable (not included) to simplify wireless setup. After the
printer is connected to the network, you will be prompted to
remove the cable.
If you're using Mac OS X 10.6 or 10.7, or you don't have a USB
cable, you will need to use the buttons on the printer to select
wireless settings. Follow the instructions on your computer
screen during software installation; they will explain how to
connect the printer wirelessly this way.
Make sure you know your network name (SSID) and network
password:
• Network name
• Network password
If you don't have this information, contact the person who set up
your network.
For more help with setting up your printer's wireless network
connection, you can view how-to-videos at epson.com/support
(U.S.) or epson.ca/support (Canada).
Direct USB Connection
Make sure you have a USB cable (not included).
Any problems?
If you experience problems during setup, see below:
Network setup was unsuccessful.
.
• Make sure you select the right network name (SSID).
• I f you see a firewall alert message, click Unblock or Allow to
let setup continue.
• I f your network has security enabled, make sure you enter
your network password (WEP key or WPA passphrase)
correctly. Passwords must be entered in the correct case.
Use the function buttons to select uppercase (AB12),
lowercase (ab12), symbols (!#%@ [Symbol]), or spaces
(Space), and to delete characters (
P ress , ,
or function button. Press OK to select it.
When you're finished, highlight Done and press OK.
The printer's screen is dark.
Press any button to wake your product from sleep mode.
).
Function buttons
, or on the printer to highlight a character