Epson XP-400 Start Here page 2

5
Lower the scanner unit.
6
P ress OK to prime the ink delivery system. Priming takes
about 4 minutes.
N ote: The cartridges included with the printer are designed for
printer setup and not for resale. After some ink is used for priming,
the rest is available for printing only in the same printer.
C aution: Don't turn off the printer while it is priming or you'll
waste ink.
4
Load paper
1
F lip the feeder guard forward.
2
R aise the paper support, if necessary. Then pull up the
extension and tilt it back slightly.
3
Pull out the output tray, then raise the paper stopper.
4
S lide the edge guide to the left.
5
L oad paper against the right edge guide and behind the
tab line on the left edge guide, with the printable side
faceup.
8½ × 11 inch
(216 × 279 mm)
(102 × 152 mm)
N ote: Don't load the paper sideways; always load it short
edge first.
6
S lide the edge guide over, against the left edge of
the paper.
7
F lip the feeder guard back.
4 × 6 inch