Connect Fax Line; Load Paper In Cassette - Epson WorkForce Pro WP-4520 Series Quick Setup Instructions

5
C lose the front cover.
T he printer starts priming the ink. This takes about
12 minutes. When you see a confirmation message on
the product's LCD screen, priming is complete.
N ote: The included cartridges prime the printer and print about
1000 black pages/900 color pages. Actual page count will vary.
C aution: Don't turn off the printer or open the cover while it is
priming or you'll waste ink.
5
Load paper in the cassette
You can load letter-, A4-, or legal-size plain paper in the
cassette. For instructions on loading envelopes and special
paper in the rear MP tray, see the online User's Guide.
1
P ull out the paper cassette.
2
S lide the edge guides outward, and position them for the
size of paper you are using.
N ote: If you are loading legal-size paper, extend the cassette as
shown.
3
I nsert the paper with the printable side facedown.
N ote: Make sure the paper is loaded against the front edge
guide and not sticking out from the end of the cassette.
4
S lide the edge guides against the paper, but not too
tight. Make sure the paper is under the tabs on the edge
guides.
5
G ently insert the paper cassette at the bottom of the
printer.
N ote: The paper may slide forward slightly as you insert the
cassette. This is normal.
6
E xtend the output tray and raise the paper stopper as
shown. (Do not raise the paper stopper for legal-size
paper.)
6
Connect the fax line
To fax, connect the included phone cord to a telephone wall
jack and to the LINE port on the back of your product. To
connect a telephone or answering machine, use the EXT. port
on your product. See the online User's Guide for more details.
Note: If you're connecting to a DSL phone line, you must use a DSL
filter or you won't be able to fax. Contact your DSL provider for the
necessary filter.