Load Paper - Epson Stylus NX625 Start Here

4
Insert the cartridges in the holder for each color.
5
Press each cartridge down until it clicks.
6
Close the cartridge cover. Press down until it clicks. Then
lower the scanner.
7
Wait while the ink delivery system primes. Priming takes
about 5 minutes.
Note: Your printer ships with full cartridges and part of the ink from
the first cartridges is used for priming the printer.
Caution: Don't turn off the printer while it is priming or you'll
waste ink.
5

Load paper

1
Pull out the paper cassette.
2
Slide the edge guides to the sides of the cassette.
3
Slide the edge guide to your paper size.
4
Load paper against the edge guide, with the glossy or
printable side face-down.
Note: Make sure the paper is loaded against the edge guide
and not sticking out from the end of the cassette.
5
Slide the edge guides against the edges of the paper,
but not too tightly.
6
Keep the cassette fl at as you insert it.
Note: The paper may slide forward slightly as you insert the
cassette. This is normal.
7
Extend the output tray and fl ip up the paper stopper.