Install Software - Epson Stylus NX200 Series Start Here Manual

5

Install software

Your software works with Windows
Windows Vista
Windows
1
M ake sure the NX200 Series is NOT CONNECTED to your computer.
Note: If you see a Found New Hardware screen, click Cancel and
disconnect the USB cable. You can't install your software that way.
2
Insert the Epson Stylus NX200 Series CD.
W ith Windows Vista, if you see the AutoPlay
window, click Run Epsetup.exe. When you see
the User Account Control screen,
click Continue.
3
C lick Install and follow the on-screen instructions.
4
W hen you see this screen, click the first option and then click Next,
unless the NX200 Series is connected to your computer through an
external print server.
I f you're using an external print server, click the second option, click
Next, then skip to step 6.
5
W hen prompted, connect the USB cable. Use any open port on
your computer.
Note: If installation doesn't continue after a moment, make sure you
securely connected and turned on the NX200 Series.
6
When you're done, remove the CD.
You're ready to copy, print, and scan! See the Quick Guide or your
on-screen User's Guide for instructions.
, and Mac OS X 10.3.9, 10.4.x, and 10.5.x.
® ®
2000, XP, XP Professional x64 Edition,
®