Compaq PRESARIO 1683 Maintenance And Service Manual page 53

Models: 1683, 1685, 1687, 1688, 1690, 1692, 1693, and 1694
Before You Begin
Removal Sequence
Product Description
Removal and Replacement
Prior to conducting any removal and/or replacement procedures, you should review and
IMPORTANT:
fully understand the section titled
Removing the Display Panel
Removal
Sequence
Assembly
Cables and
(steps 10 -11)
Connectors
Battery Pack
Palmrest
Cover with
Touch Pad
Heatspreader
Keyboard
Processor
Hard Drive
DVD or
CD Drive
Battery
Charger
Board
Modem
Display Panel
Assembly
Upper CPU
Cover
Speaker
Assembly
Diskette
Drive
Fan
Assembly
System
Board
Dip Switch
Settings
Memory
Module
Presario 1600 Series
Specifications
Troubleshooting
Pin Assignments
"Before You
Parts Catalog
Battery Operations
Begin".
Previous Step
10.
IMPORTANT:
11.
NOTE:
To replace the display panel
assembly, reverse the
previous procedures.
Return
Index
Remove the
connector on the end
of the display flex
data cable.
Compaq
recommends
replacing
the LVDS
interface
connector
on the
display flex
data cable
after
removing.
The
CAUTION:
connector on the end
of the flex cable
must be removed
before the cable can
be routed through
the slot on the Upper
CPU cover.
Gently pull the flex
data cable and
backlight cable
attached to the
display panel
assembly through the
slot on the Upper CPU
cover and remove the
display panel
assembly with flex
data and backlight
cable attached.
When removing the
display panel
assembly, observe
the display panel
assembly flex cable
routing and
position.