Compaq PRESARIO 1683 Maintenance And Service Manual page 34

Models: 1683, 1685, 1687, 1688, 1690, 1692, 1693, and 1694
Before You Begin
Removal Sequence
Product Description
Removal and Replacement
Prior to conducting any removal and/or replacement procedures, you should review
IMPORTANT:
and fully understand the section titled
Removing the Palmrest Cover with
Removal
Sequence
Touch Pad (step 6)
Cables and
Connectors
Battery Pack
Palmrest
Cover with
Touch Pad
Heatspreader
Keyboard
Processor
Hard Drive
DVD or
CD Drive
Battery
Charger
Board
Modem
Display Panel
Assembly
Upper CPU
Cover
Speaker
Assembly
Diskette
Drive
Fan
Assembly
System
Board
Dip Switch
Settings
Memory
Module
Presario 1600 Series
Specifications
Troubleshooting
Pin Assignments
"Before You
Parts Catalog
Battery Operations
Index
Begin".
Previous Steps
6.
Tilt the
palmrest cover
with touch pad,
allowing it to
rest on top of
the keyboard,
and disconnect
the flex cable
from the LIF
connector on
the palmrest
cover.
CAUTION:
replacing the
palmrest cover
with touch pad,
ensure that the
cable is fully
inserted into
the LIF
connector on
the system
board. If the
metal end
should come in
contact with
the keyboard,
damage may
occur to the
computer.
To replace the
palmrest cover
with touch pad,
reverse the
previous
procedures.
NOTE:
When
When
replacing the
palm rest
cover ensure
the cable is
properly
routed
through the
slot on the
Upper CPU
cover.