Table of Contents
Advertisement
Commercial Series TriTech and TriTech AM
detectors
5.2
Install options
Install directly to the surface
When installing onto a flat surface, select the installation holes shown in the figure. Drill or tap
out holes with a screwdriver.
Figure 5.1: Left: wall installation, right: corner installation
Bosch Security Systems B.V.
Install the detector using the detector base.
Install the detector on a flat wall or in a corner. Refer to Mount directly –
for linking.
Install the detector using a bracket. Refer to Install on a bracket, page
14 .
Detector coverage patterns are designed for optimal performance when
installed level both vertically and horizontally. The detector base includes
a removable bubble level which helps you align the unit. Before drilling
the installation holes, use the bubble level to align the detector. Refer to
Bubble level.
Installation manual
Installation | en
13
2022.01 | 01 | F.01U.401.708
Advertisement
Table of Contents
