Table of Contents
Advertisement
PAVIRO Call Stations
5.3
Retrofit options
Notice!
This section applies to the PVA-15CST call station only.
The call station can be retrofitted with a maximum of three
covered buttons PVA-1EB and / or one key switch PVA-1KS.
Additional control elements can be used, for example for
triggering alarms in certain areas (selection alarm) or for
switching the system ON/OFF. The functions are assigned via
IRIS-Net during configuration.
5.3.1
Alarm button
The PVA-1EB is an optional button for installation in the call
station. The transparent cover cap prevents unintentional
actuation of the button. A high-efficiency LED is integrated for
optical visualization, while also ensuring maximum operational
reliability. The button feed lines are monitored by the call
station. If an error occurs, this is indicated in the error log of the
system.
Figure 5.1: PVA-1EB
Assembly
Note the following information regarding installation of the
PVA-1EB in the call station.
Notice!
An application note for the PVA-1EB is available.
Bosch Security Systems
Installation | en
2018.04 | 04 | F01U306899
21
Hide quick links:
Advertisement
Table of Contents
