Standards And Approvals - Epson Stylus Photo R3000 User Manual

Epson Stylus Photo R3000

Standards and Approvals

U.S. model:
Safety UL60950-1
CAN/CSA-C22.2 No.60950-1
EMC FCC Part 15 Subpart B Class B
CAN/CSA-CEI/IEC CISPR 22 Class B
This equipment contains the following wireless module.
Manufacturer: Marvell Semiconductor Inc.
Type: SP88W8786-MD0-2C2T00
This product conforms to Part 15 of the FCC Rules and
RSS-210 of the IC Rules. Epson cannot accept
responsibility for any failure to satisfy the protection
requirements resulting from a non-recommended
modification of the product. Operation is subject to the
following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept
any interference received, including interference that
may cause undesired operation of the device.
To prevent radio interference to the licensed service,
this device is intended to be operated indoors and away
from windows to provide maximum shielding.
Equipment (or its transmit antenna) that is installed
outdoors is subject to licensing.
European model:
Low Voltage EN60950-1
Directive
2006/95/EC
EMC directive EN55022 Class B
2004/108/EC
EN61000-3-2
EN61000-3-3
EN55024
R&TTE EN300 328
Directive
EN301 489-1
1999/5/EC
EN301 489-17
EN60950-1
For European users:
We, Seiko Epson Corporation, hereby declare that this
equipment Model B471A is in compliance with the
essential requirements and other relevant provisions of
Directive 1999/5/EC.
User's Guide
Appendix
114
For use only in Ireland, UK, Austria, Germany,
Liechtenstein, Switzerland, France, Belgium,
Luxemburg, Netherlands, Italy, Portugal, Spain,
Denmark, Finland, Norway, Sweden, Iceland, Cyprus,
Greece, Slovenia, Bulgaria, Czech, Estonia, Hungary,
Latvia, Lithuania, Poland, Romania, and Slovakia.
Only indoor operation is permitted in France. If used
outside of own premises, general authorization is
required in Italy.
Epson cannot accept responsibility for any failure to
satisfy the protection requirements resulting a
non-recommended modification of the products.