Table of Contents
Advertisement
CLEANING
To keep the drive is the best condition for securing the customer's data, periodical cleaning
is required.
Cleaning the Read/Write Head
When the cleaning notice is indicated on the Single Character Display, clean the Built-in
LTO internal read/write head
Set the provided cleaning cartridge or our cleaning cartridge into the drive based on the
procedure which is described as "Set the Data Cartridge" in the "HANDLING" section in
page 21 .
When the cleaning cartridge is set into the Built-In LTO, the cleaning operation is
automatically started.
After cleaning, the cleaning cartridge is automatically ejected.
Use our Cleaning cartridge to clean the Built-In LTO. If you use a cleaner of the other
manufacturer, a machine failure may be caused. LTO Cleaning Cartridge can be
used for around 50 times
Perform the cleaning operation when the cleaning is required by the display.
Cleaning the Built-in LTO
If the Built-in LTO looks dirty, gently wipe its surface with soft cloth moistened with water or
detergent
Do not clean the Built-In LTO using chemicals such as benzene or thinner (volatile
chemicals), which may cause the drive to be deformed or discolored. For the same
reason, do not spray insecticide. If a chemical adheres to the drive surface,
immediately wipe it with soft cloth moistened with water.
25
Advertisement
Table of Contents
