Starting And Stopping The Engine - Stihl FS 410 C-M K Instruction Manual

Hide thumbs Also See for FS 410 C-M K:
Table of Contents

Advertisement

English
► Fit the fuel tank cap on the tank opening.
► Turn the tank cap clockwise and tighten it
down firmly by hand.
The fuel tank is closed.
9
Starting and Stopping the
Engine
9.1
Starting the engine
► Place the brushcutter on a level surface so
that the cutting attachment does not touch the
ground or other objects.
► Remove the transport guard.
2
► Depress the manual fuel pump (1) at least 5
times.
► If the engine is warm: Leave the choke lever
(2) in position .
► If the engine is at ambient temperature: Push
in the choke lever (2) at the edge and set it in
position
.
14
4
1
NOTICE
■ The brushcutter can be damaged if pressed
into the ground with your foot or knee.
► Press the brushcutter against the ground
with your left hand. Do not stand or kneel
on the shaft.
► Press the brushcutter against the ground with
your left hand.
► Pull the starter grip slowly with your right hand
until you feel it engage.
► Pull the starter grip quickly and allow the
starter rope to rewind several times until the
engine runs.
► If the choke lever (2) is in position
press the throttle lever lockout (3) and the
throttle trigger (4).
The choke control (2) springs to position .
The engine runs at idling speed.
► If the engine is cold: Warm up engine by
briefly opening the throttle.
► If the cutting attachment rotates when the
engine is idling: Rectify the malfunction.
Throttle cable adjustment is not correct.
► If the engine does not start: Move the choke
lever (2) to position
3
the engine.
► If the engine is flooded: Try to start the engine
again with the choke lever (2) in position .
9.2
Shut off the engine
► Release the throttle trigger (1) and throttle trig‐
ger lockout (2).
The cutting attachment comes to a standstill.
► Depress the stop switch (3).
The engine stops.
► If the engine does not stop:
► Move the choke lever to position
The engine stops.
► Do not use your trimmer and contact a
STIHL servicing dealer for assistance.
There is a malfunction in the brushcutter.

9 Starting and Stopping the Engine

and try again to start
3
1
2
0458-839-0101-A
: Briefly
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

460 c-m k

Table of Contents