Starting / Stopping The Engine - Stihl TS 700 Instruction Manual

English
If the cap can be removed or the
markings do not align, close the cap
again – see sections "Closing the cap"
and "Checking the lock".
Changing the fuel pickup body every
year
Drain the fuel tank
N
Pull the fuel pickup body out of the
N
tank with a hook and disconnect it
from the hose
Connect a new fuel pickup body to
N
the hose
Return the fuel pickup body to the
N
tank
28
Starting / Stopping the
Engine
Note the safety instructions. Refer
N
to the chapter headed "Safety
precautions and working
techniques".
Press throttle trigger lockout (1) and
N
throttle trigger (2) simultaneously
Hold both triggers down
N
Move the master control lever (3) to
N
START and hold it in position too
Release the throttle trigger, master
N
control lever and throttle trigger
lockout in succession = starting
throttle position
Set the choke (4) according to the
N
engine temperature
c If engine is cold
e if the engine is warm (even if the
engine is already running but is still
cold or if the warm engine was shut
off for less than 5 min)
o if the engine is hot (if the hot engine
was switched off for longer than
5 min)
Press the button (5) of the
N
decompression valve before each
starting procedure
Press the bulb (6) of the manual fuel
N
pump 7 - 10 times – even when the
bulb is still filled with fuel
TS 700, TS 800