Starting / Stopping The Engine - Stihl TS 410 Instruction Manual

Starting / Stopping the
Engine
3
2
N Press throttle trigger lockout (1) and
throttle trigger (2) simultaneously
N Hold both triggers down
N Move the slide control (3) to START
and hold it in position too
N
Release the throttle trigger, slide
control and throttle trigger lockout in
succession – starting throttle
position
TS 410, TS 420
3
N Set the choke (4) according to the
engine temperature
c If engine is cold
e if the engine is warm (even if the
engine is already running but is still
cold or if the warm engine was shut
1
off for less than 5 min)
f if the engine is hot (if the hot
engine was switched off for longer
than 5 min)
4
5
N Press the button (5) of the
decompression valve before each
starting procedure
N
Press the bulb (6) of the fuel pump
7-10 times – even when the bulb is
still filled with fuel
Starting
N Place the cut-off machine carefully
on the ground, ensuring that the
cutting wheel cannot touch the
English
6
25