Advertisement
Step 3.
Verify that the hot-added shelf is cabled correctly.
Step 4.
If you disabled drive ownership automatic assignment in
ownership, and then reenable drive ownership automatic assignment if needed:
a. Display all unowned drives:
You can enter the command on either controller module.
b. Assign each drive:
You can enter the command on either controller module.
You can use the wildcard character to assign more than one drive at once.
c. Reenable drive ownership automatic assignment if needed:
name -autoassign on
You must reenable drive ownership automatic assignment on both controller modules.
Contacting Support
You can contact Support to obtain help for your issue.
You can receive hardware service through a Lenovo Authorized Service Provider. To locate a service
provider authorized by Lenovo to provide warranty service, go to
and use filter searching for different countries. For Lenovo support telephone numbers, see
serviceprovider
https://datacentersupport.lenovo.com/supportphonelist
storage disk show -container-type unassigned
storage disk assign -disk disk_name -owner owner_name
for your region support details.
Step 1 on page 3
, manually assign drive
storage disk option modify -node node_
https://datacentersupport.lenovo.com/
5 5
Advertisement
