Manually Ejecting A Disc - Compaq Presario 700 Series User Manual

Mobile internet pc
Hide thumbs Also See for Presario 700 Series:
Table of Contents

Advertisement

Using the CD or DVD Drive
S
Did you know...
able to eject a disc from the CD or DVD drive. To remove a disc
without powering up your Notebook, you must eject the disc from
the drive manually.
If you need to eject a disc when the power is off, complete the
following steps to eject the disc manually:
1. Make sure the power is off and any external power sources
are disconnected.
2. Insert a small rod or pin, such as a paper clip (approximately
1/16 inch in diameter and at least 3/8 inch in length) into the
Manual Eject Hole and push firmly as shown in the
preceding figure.
3. Remove the disc from the tray.
4. Gently push the tray back into the drive until it locks into
place.
5–4
If your Notebook power is off, you will not be
cad goes here
Mobile Internet PC User's Guide
Presario 700 Series

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents