Manual White Balance - Olympus CAMEDIA C-2500L Additional Functions

7
1
2
3
E-50
When the white light is memorized, "GOOD" will be displayed on the
LCD monitor.
Press the [OK] button again to execute the white balancing reference
setting. If the light source is not properly memorized, "NO GOOD X"
is displayed on the LCD monitor. In this case, press the [OK] button
again to return to the display in
white balancing reference value. To reset the white balancing refer-
ence value, repeat steps
7
Press the shutter release button down halfway.
This will lock the focus and exposure. The green lamp inside the
viewfinder will light up to indicate the camera is ready to take the pic-
ture.
MEMO
8
Press the shutter release button down all the way.
• Select [AUTO] of the menu to return to auto white balancing.
The picture will be taken using the memorized white as a reference.
• Ruled paper such as notebook paper can be used to set white balance.
White Balance

Manual White Balance

Manual white balancing lets you change the tone of the color in your pho-
tographs.
When setting the color temperature higher than 4500 K stresses the red
color of the sunset.
By reverse, lowering the color temperature makes the sunset image look
like blue sky even when the sky is red.
1
Set the mode dial to "P", "A" or "M".
2
Press the [
The first menu will appear on the LCD monitor.
3
Align the cursor with
dial.
4
Select
5
Set white balancing with the top / bottom point of the jog dial.
White balancing can be selected from 3000K, 3700K, 4000K, 4500K,
5500K or 6500K.
6
Press the [OK] button.
3
4 6
to
will appear on the control panel.
] button.
with the top / button point of the jog
with the right / left point of the jog dial.
will appear on the control panel.
while keeping the previously set
.