Table of Contents
Advertisement
14. Select a Router MAC Address radio button:
• Use Default Address: Use the default MAC address.
• Use Computer MAC Address: The router captures and uses the MAC address
of the computer that you are now using. You must use the one computer that the
ISP allows.
• Use This MAC Address: Enter the MAC address that you want to use.
15. Click the Apply button.
Your settings are saved.
16. Click the Test button to test your Internet connection.
If the NETGEAR website does not display within one minute, see You cannot access
the Internet on page 160.
Set a PPTP or L2TP Internet connection
You can manually specify the connection settings for a PPTP or L2TP Internet service
for which you must log in. Use the information that your ISP gave you to connect to your
Internet service. If you cannot find this information, contact your ISP. Entering incorrect
information might prevent the router from connecting to the Internet.
To set a PPTP or L2TP Internet connection:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Internet.
The Internet Setup page displays.
5. Select the Does your Internet connection require a login? Yes radio button.
The page adjusts.
6. From the Internet Service Provider menu, select PPTP or L2TP as the encapsulation
method.
The page adjusts again.
Specify Your Internet Settings
4-Stream AX1600 WiFi 6 Router Model RAX5
26
User Manual
Advertisement
Table of Contents
