NETGEAR RAX5 User Manual page 100

5. Select the Enable VLAN / Bridge group check box.
The page expands.
6. Select the By VLAN tag group radio button.
The page expands.
The table includes default VLAN 10 that has all Ethernet ports and WiFi networks as
members. This VLAN is enabled by default.
7. Click the Add button.
The Add VLAN Rule page displays.
8. Specify the following settings for the VLAN tag group:
• Name: Enter a name for the VLAN tag group.
The name can be up to 10 characters.
• VLAN ID: Enter a value from 1 to 4094.
• Priority: Enter a value from 0 (lowest priority) to 7 (highest priority).
9. Select the check box for a wired Ethernet port or wireless network.
If your device is connected to an Ethernet port on the router, select the wired Ethernet
port check box that corresponds to the Ethernet port on the router to which the
device is connected. If your device is connected to your router's WiFi network, select
the WiFi check box that corresponds to the router's WiFi network to which the device
is connected.
You must select at least one Ethernet port or WiFi network. You can select more than
one port or WiFi network.
10. Click the Add button.
Your settings are saved.
The VLAN tag group is added and automatically enabled. The VLAN / Bridge Settings
page displays again.
Manage the WAN and LAN
Network Settings
4-Stream AX1600 WiFi 6 Router Model RAX5
100 User Manual