Sony DIRECTV SAT-HD300 Operating Instructions Manual page 110

8. CUSTOM IZATION
8-21. Testing the System
Transponder Test
W hen in Satellite mode, diagnoses all transponder signals of each Satellite. Once the
Transponder Test is done, all transponder signal status of the selected Satellite w ill be dis-
played.
To test the Transponder:
1. Press the M ENU button on the Remote Control to display the on-screen menu.
2. Scroll dow n using "
3. Select the System menu by pressing "
4. Scroll dow n to System Test using "
5. M ove the highlight to the right w ith "
6. Scroll dow n to Transponder Test using "
7. Press "
8. Select one of SAT A/ SAT B/ SAT C w ith "
9. M ove the highlight to the Start Button and press "
10. Press M ENU button to return to the previous level or press the EXIT button on the remote con-
109
Downloaded from: https://www.usersmanualguide.com/
E " on the remote control.
" and the pop-up dialogue box w ill be displayed.
It w ill run automatically and if there is any problem in your system, the pop-up box w ill be dis-
played.
trol to return to TV view ing.
Note : Depending on your location in the United States, certain transponders may not be
available. It is normal for the signal strength level of a few transponders to be at zero.
" .
E " .
G " to display the system test option box.
" on the remote control.
E
" .
F G
" to activate the system transponder test.