Switch Setup - D-Link DMS-107 Quick Installation Manual

PRODUCT SETUP
SWITCH SET-UP
LAN
Internet
LAN LAN LAN LAN
Router
Power
Status LED
Step 1
Plug the power adapter into a free wall socket, then plug the other
end of the power adapter cable into the power port of the switch.
The power LED will light up, confirming that the device is powered
up successfully.
Step 2
Use a LAN cable to connect your network device to one of the 7
ports on the switch.
Step 3
Check the Link/Act lights(LEDs) on the switch to verify a proper
connection.
3