Table of Contents
Advertisement
Troubleshooting
Problem
Spray pattern "spits" at the end or
beginning:
Spray Tip continues to drip or ooze
material after Trigger is released:
ti30016a
Material leaks around Spray Tip
Guard or Spray Tip handle
32
Excess material has
accumulated on Spray Tip
and Spray Tip Guard, or
Spray Tip is partially
plugged
Spray Tip is not fully
inserted into Spray Tip
Guard
Spray Tip is worn or
ti15525a
ti15525a
damaged
Pump has reached its
maximum life
Spray Tip is worn.
Spray Tip not inserted
completely into Spray Tip
Guard.
Spray Tip seal and seat
are damaged or not
properly installed.
Cause
Clean Spray Tip and Spray Tip
Guard. Clear Spray Tip. See
Clear Tip Clogs, page 19.
See Clear Tip Clogs, page 19.
Replace Spray Tip.
Replace pump.
Replace Spray Tip. See
Reference, page 25.
See Reference, page 25.
See Reference, page 25.
Solution
3A4702E
Advertisement
Table of Contents
