Table of Contents
Advertisement
Startup
Startup
1.
Install the cup onto the sprayer as
follows:
a.
Verify Pump Filter is installed and
clean.
b.
Align VacuValve (on Cup Lid) with
Prime Knob (on sprayer).
c.
Push cup assembly onto the
sprayer, twist to lock.
14
2.
Prime the pump as follows:
a.
Verify Prime Knob is pointed down
to PRIME position.
b.
Plug sprayer into a grounded
power source.
c.
Open the VacuValve cap and
gently squeeze the FlexLiner until
no more air bubbles appear in the
VacuValve.
NOTE: Tilt the sprayer such that the
VacuValve is the highest point so that all air
in the FlexLiner can be fully evacuated.
3A4702E
Advertisement
Table of Contents
