New And Changed For Firmware Release 11.1(2); New And Changed For Firmware Release 11.1(1); Phone Setup - Cisco 7800 Series User Manual

New and Changed for Firmware Release 11.1(2)

Revisions
Updated the menu navigation for ringtone setting to
support audio equalizers to customize audio for
handset and headset (acoustic audio)
Added a new topic to support audio equalizers to
customize audio for handset and headset (acoustic
audio)
Updated the topic to support screen saver type lock
removal
New and Changed for Firmware Release 11.1(2)
Feature
Emergency Call Support
Reverse Name Lookup

New and Changed for Firmware Release 11.1(1)

Revision
Adjust Contrast with a slider
Call Recording Support
Instant Message and Presence Contacts
Presence
Call Center Support
XSI Call Logs - Server All Calls menu

Phone Setup

Your administrator sets up your phone and connects it to the network. If your phone is not set up and connected,
contact your administrator for instructions.
Cisco IP Phone 7800 Series Multiplatform Phones User Guide
10
New or Changed Sections
Change the Ringtone, on page 94
Specify an Audio Device for a Call, on page 111
Change the Screen Saver, on page 107
Configure the Screen Saver with the Phone Web
Interface, on page 108
New or Changed Sections
Make an Emergency Call, on page 36
Administrators enable and disable this feature. For
information about this feature, see
Lookup for Incoming and Outgoing Calls, on page
78.
Updated Section
Adjust the Phone Screen Contrast, on page 110
Record a Call, on page 50
Instant Message and Presence Contacts, on page 51
Presence, on page 51
Make a Call to an IM and Presence Contact, on page 51
Change Your Presence State, on page 52
Call Center Features, on page 55
View your Recent Calls, on page 79
Your Phone
Reverse Name