Phone Settings Overview; Change The Ringtone; Assign A Ring Tone With The Phone Web Page; Control Ringer Volume - Cisco 7800 Series User Manual

Phone Settings Overview

Phone Settings Overview

Your administrator can configure the phone to make the setting menus available on the phone screen or on
the phone web interface. If you can't find a specific menu, contact your administrator.

Change the Ringtone

You can set a ringtone for an incoming call.
Procedure

Step 1

Press Applications
Step 2 Select User preferences > Ringtone > Ext (n) - Ring tone, where n= extension number.
Step 3
Scroll through the list of ringtones and press Play to hear a sample.
Step 4 Press Select and then Set to save a selection.

Assign a Ring Tone with the Phone Web Page

Procedure
Step 1
On the phone web page, select User Login > Voice > Ext(n), where (n) is the number of an extension.
Step 2 In Call Feature Settings area, choose a ringtone from the Default Ring drop-down list.
If you don't want to specify a ringtone for the phone line, choose No ring. Your phone doesn't ring when
receiving an incoming call.
Step 3
Click Submit All Changes.

Control Ringer Volume

You can control the ringer volume of an incoming call on the phone, or from the phone administration web
page.
If your administrator restricts your ability to control the ringer volume, you can't perform this task from either
the phone volume key or from the phone administration web page.
Before you begin
Your administrator must allow you to control the ringer volume.
Cisco IP Phone 7800 Series Multiplatform Phones User Guide
94
.
Settings