Changing Network Connection Settings - Canon IX-R7000 Operation Manual

Changing Network Connection Settings

You can configure the individual printer ID and TCP/IP-related settings.

You can also change the settings by using the printer driver (→See "2. Print over a
Note
network" in "PrinterDriverManual(E).pdf" on the Printer Driver CD for network
settings).
1
Switch from normal mode to user
mode.
→See "Switching to User Mode" on page 23 for details on
how to switch to user mode.
2
Press the  key until [Interface Setup]
is displayed, then press the SET key.
3
Select the setting to change by using
the / keys, then press the SET key.
• Items that can be changed in each settings menu are
described below.
Settings Menu
Printer ID
DHCP
IP Address
Subnet Mask
Default Gateway
MAC Address
IPSec
Timeout(s)
Password
53
Set the individual printer ID (0-15).
Set the DHCP function ON/OFF.
Set the IP address. (Only when the DHCP function is OFF)
Set the subnet mask. (Only when the DHCP function is OFF)
Displays the default gateway. (Only when the DHCP function is OFF)
Displays the MAC address.
Set the IPSec function ON/OFF.
Set the session timeout (seconds).
Set the password ON/OFF for setting TCP/IP using the printer driver.
Additionally, if ON, then set the password.
Normal Mode
MENU
Ready to Print Ready to Print
Printer Info. Printer Info.
SET:>> SET:>>
SET
Interface Setup Interface Setup
SET:>> SET:>>
Printer ID Printer ID
Password Password
OFF OFF
Details
User Mode
Printer Info. Printer Info.
SET:>> SET:>>
Printer ID Printer ID
0 0