Set The Orientation Of Magnetic Cards/Ic Cards To Load - Canon IX-R7000 Operation Manual

Set the Orientation of Magnetic Cards/IC Cards to Load

Prior to loading magnetic card/IC cards, you need to set the orientation of magnetic cards/IC
cards to load.
→See "Loading Magnetic/IC Cards" on page 10 for how to set Magnetic Cards/IC Cards.

You can also change the settings by using the printer driver (→See "Opening the
Note
Printer Driver Settings Screen" on page 88).
1
Switch from normal mode to user
mode.
→See "Switching to User Mode" on page 23 for details on
how to switch to user mode.
2
Press the  key until [Card Setup] is
displayed, then press the SET key.
3
Press the  key until [Set Face] is
displayed, then press the SET key.
4
Change the settings by using the /
keys, then press the SET key.
• By combining printing sides of the card (front surface/
rear surface) and magnetic strips/IC cards, settings for
loading can be changed as shown below.
Printer Settings
Normal Mode
MENU
Ready to Print Ready to Print
Printer Info. Printer Info.
Printer Info. Printer Info.
SET:>> SET:>>
SET
Card Setup Card Setup
Card Type Card Type
SET:>> SET:>>
Card Type
SET
Set Face Set Face
STANDARD
STANDARD STANDARD
Set Face Set Face
STANDARD STANDARD
Set Face Set Face
REVERSE REVERSE
User Mode
SET:>> SET:>>
50