11. Lubrication – Lubricate all fittings per
maintenance label under seat and check
hydrostat oil level (see Maintenance
Schedule on page 21).
12. Remove discharge chute from transport
position and place in operating position.
Transport Position
48" Decks
Operating Position
13. Level Deck – Check unit to ensure deck
level set at factory has been maintained
(see Leveling the Mower Deck on
page 33).
14. Check function of all controls – Ensure
unit runs and performs properly.
WARNING: FAILURE OF
CONTROLS could result in death or
serious injury.
52" and 60" Decks
EN - 13