Compaq P1210 User Manual page 20

17" Model
Group
Item
Icon
Icon
SCREEN
COLOR TEMPERATURE
HORIZ-PHASE
VERT-POSITION
GEOMETRY
PIN-BALANCE
KEY-BALANCE
GEOMETRY RESET
MOIRE CANCEL LEVEL
CLAMP PULSE POSITION
VIDEO
POWER-SAVE
CONTROL LOCK
MISC.
Press the Minus Button
Item
To decrease the contrast.
CONTRAST
To decrease the brightness.
BRIGHT
To decrease the color temperature. To increase the color tempera-
When FPM is on, the color temperature is fixed to 9300K and it is not
adjustable.
To narrow the width of the image
HORIZ-SIZE
on the screen.
To move the image to the left.
To narrow the height of the image
VERT-SIZE
on the screen.
To move the image down.
To collapse the center of the
PINCUSHION
image.
To decrease the width at the top
of the screen image and to
KEYSTONE
increase the width at the bottom.
To expand the width of the screen
TOP-PIN
image near the corners of top.
To expand the width of the screen
BOTTOM-PIN
image near the corners of bottom.
To move the top and bottom of the
screen image to the right.
To make the screen slant to the
left.
To rotate the image counterclock-
ROTATION
wise.
To decrease the level of the moire-clear wave.
To eliminate an excessive green or white-back ground that
may occur when external sync signals are applied to the
monitor.
To clamp the video signal at
the front of the H-Sync pulse.
To select 1.0V of video input.
VIDEO LEVEL
DEGAUSS
To select the constant power
consumption mode.
To permit all OSD adjustments.
It shows the current scanning frequency and Preset No. or user mode.
DIAGNOSIS
To choose the language used on OSD.
LANGUAGE
ENG......English, ESP......Spanish,
GER......German, FRA......French
- 9 -
Press the Plus Button
To increase the contrast.
To increase the brightness.
ture.
To expand the width of the image
on the screen.
To move the image to the right.
To expand the height of the image
on the screen.
To move the image up.
To expand the center of the
image.
To increase the width at the top of
the screen image and to decrease
the width at the bottom.
To narrow the width of the screen
image near the corners of top.
To narrow the width of the screen
image near the corners of bottom.
To move the top and bottom of
the screen image to the left.
To make the screen slant to the
right.
To rotate the image clockwise.
To restore to factory preset level.
To clamp the video signal at the
back of the H-Sync pulse.
To select 0.7V of video input.
To eliminate possible color shad-
ing or impurity.
To select the power-save mode.
To lock the OSD function except for
"BRIGHT" and "CONTRAST".
JPN......Japanese,