Table of Contents
Advertisement
■
Under extreme usage or temperature conditions,
battery leakage may occur. If liquid comes in contact
with the skin, wash immediately with soap and water,
then neutralize with lemon juice or vinegar. If liquid gets
into the eyes, flush them with clean water for at least
10 minutes, then seek immediate medical attention.
Following this rule will reduce the risk of serious personal
injury.
■
Do not charge battery packs that show signs of leaks.
Dispose of them properly.
■
Charge the battery pack in a location where the ambient
temperature is between 10 °C and 38°C.
■
Store the battery pack in a location where the ambient
temperature is between 0°C and 20°C.
■
Use the battery pack in a location where the ambient
temperature is between 0°C and 40°C.
BATTERY PACK REMOVAL AND PREPARATION
FOR RECYCLING
■
To preserve natural resources, recycle or dispose
of batteries properly in accordance with the local
government guidelines.
■
Consult your local waste authority for information
regarding available recycling and/or disposal options.
■
Upon removal, cover the battery pack terminals with
heavy-duty adhesive tape. Do not attempt to destroy
or disassemble the battery pack or remove any of its
components. Lithium
batteries must be recycled or
disposed of properly. Never touch both terminals with
metal objects and body parts as short circuit may result.
Keep the battery pack away from children. Failure to
comply with these warnings could result in fire and/or
serious injury.
TRANSPORTATION AND STORAGE
■
Turn off the product, engage the parking brake, and
remove the start key. Make sure that all moving parts
have come to a complete stop. Allow the product to cool
down before storing or transporting.
■
Remove all foreign materials from the product. Store
the product in a cool, dry, and well-ventilated place
that is inaccessible to children. The start key should be
removed and stored in a separate location out of the
reach of children.
■
Keep the product away from corrosive agents, such as
garden chemicals and de-icing salts. Do not store the
product outdoors.
■
For transportation in vehicles, remove the start key,
and secure the product against movement or falling to
prevent injury to persons or damage to the product.
■
Use extra care when loading or unloading the product
onto a trailer or truck. Step on the brake pedal as needed
to control the speed. The product will freely roll if it is
moved on an inclined surface without stepping on the
brake pedal or engaging the parking brake. When
loading or unloading the product, do not exceed the
maximum recommended operation angle of 15°.
■
Use extreme caution when lifting or tilting the product for
maintenance, cleaning, storage, or transportation. The
blade is sharp. Keep all body parts away from the blade
while it is exposed.
■
Store the product in a location where the ambient
temperature is between -10°C and 50°C.
TRANSPORTING LITHIUM BATTERIES
■
Transport the battery in accordance with local and
national provisions and regulations.
■
Follow all special requirements on packaging and
labelling when transporting batteries by a third party.
Ensure that no batteries can come in contact with other
batteries or conductive materials while in transport
by protecting exposed connectors with insulating,
nonconductive caps or tape. Do not transport batteries
that are cracked or leaking. Check with the forwarding
company for further advice.
MAINTENANCE
■
Use only original manufacturer's replacement parts,
accessories and attachments. Failure to do so can cause
possible injury, can contribute to poor performance, and
may void your warranty.
■
Service on the product and the charger must be
performed by qualified repair personnel only. Service or
maintenance performed by unqualified personnel could
result in injury to user or damage to the product. Have
the product serviced by an authorised service centre
only.
■
Maintain the product with care and in good working
condition. Keep blades sharp and guards in place and
in working order. To prevent serious personal injury,
prevent damage to the product, and to maintain best
performance, replace damaged, bent, cracked, or
unevenly worn out blades. An unbalanced blade causes
vibration that could damage the motor drive unit or could
cause personal injury.
■
Turn off the product, engage the parking brake, and
remove the start key. Make sure that all moving parts
have come to a complete stop:
●
before leaving the product unattended (including
disposal of grass clippings)
●
before clearing blockages or unclogging the
discharge chute
●
before checking, cleaning, or working on the product
●
before removing the mulch cover
●
before opening the grass discharge chute cover
●
after striking a foreign object
–
Thoroughly inspect the product for any damage.
–
Replace the blade if it is damaged in any way.
–
Repair any damage before restarting and
continuing to operate the product.
●
whenever the product starts to vibrate abnormally
(check immediately)
–
Inspect for damage, particularly the blades.
–
Replace the blade if it is damaged in any way.
–
Replace or repair any damaged parts.
–
Check for and tighten any loose parts.
■
The side discharge chute is a spring-loaded guard that
covers the side discharge opening on the cutting deck
and deflects grass clippings and debris away from the
operator. Always ensure that the motor is off and the
blades have stopped moving before inspecting, moving,
cleaning, or performing maintenance on the side
discharge chute.
■
Replace damaged blades and bolts in sets to preserve
balance.
5
Original Instructions
Advertisement
Table of Contents
