Installing The Battery Pack; Charging The Mower - Ryobi ROBOYAGI RY36LMRX Original Instructions Manual

2. Once the boundary wires are ¿ xed, connect the
charging tower and charging pad cables, and install the
charging tower.
1
3. Connect the transformer's power cable to a 100 - 240
V mains. After the power supply is connected, ensure
that the LED status indicator on the charging station is
solid green.
For more information on other LED status, refer to the
"Charging Station LED Status Indicator".

INSTALLING THE BATTERY PACK

1. Turn the product upside down on a smooth, À at, and
level surface.
2. Turn o the main switch.
2
3. Insert the battery pack into the product.
4. Install and secure the battery cover.
5. Dock the mower to the charging station to activate and
charge the battery pack.

CHARGING THE MOWER

As soon as the charging station is connected and the LED
is green, it is possible to charge the mower.
1. For ¿ rst-time use, remove all the protective plastic ¿ lm
from the mower.
2. Turn on the master switch, which is located at the
underside of the mower.
1
2
EN
SV
DA
NO
FI
15