Related Manuals for Sentry ISOLOK SAL-Q
Summary of Contents for Sentry ISOLOK SAL-Q
- Page 1 Original Instructions Installation, Operation & Maintenance Manual ISOLOK SAL-Q Sampler Point Samplers S-LS-IOM-00304-6 9-17...
- Page 2 Sentry Equipment Corp instructions. Otherwise, injury, damage, or both may result. Copyright © 2017 by Sentry Equipment Corp. All rights reserved. All product and company names are property of their respective owners. This document contains proprietary information. No part of this document may be photocopied or reproduced without the prior written consent of Sentry Equipment Corp.
-
Page 3: Table Of Contents
Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 ISOLOK SAL-Q Sampler... -
Page 4: Safety Information
 NOTE Information that requires special emphasis.  TIP Alternate techniques or clarifying information. SHALL: This word is understood to be mandatory. SHOULD: This word is understood to be advisory. Sentry Equipment Corp... -
Page 5: General Safety Precautions
If the sample container is removed from the sampler, do not insert any body part or other item into the sample discharge port. Crushing will occur. ISOLOK SAL-Q Sampler... -
Page 6: General Description
The Sentry® ISOLOK® SAL-Q automatic isolatable sampler is designed to obtain samples of liquid and slurry flowing in a process stream, into which extends a plunger with an annulus for sampling . The ISOLOK SAL-Q sampler has been configured specifically for use in sampling the process media at the process conditions provided by the user at time of manufacture . -
Page 7: Installation
. Fasten the chamber to the knife gate valve using the provided four (4) 3/8in hex head bolts . 6. Connect all airlines, flushing lines and any required piping to the discharge tube . The sampler’s installation is now complete . ISOLOK SAL-Q Sampler... -
Page 8: Operation
Operation The ISOLOK SAL-Q sampler is directly controlled by a 1 x 5/3 double-coil, spring return solenoid valve (solenoid 1) and a 1x3-way single coil spring return solenoid valve (solenoid 2) . The solenoid valves need to be operated either by the customer plant’s own DCS/PLC or a sampler controller . -
Page 9: Air Cylinder Seals Change-Out
(4) tie rods, allowing access to the first air cylinder . Remove the worn seals from the rod gland, piston(s) and end cap . Usually only the piston and rod gland seals need replacing . ISOLOK SAL-Q Sampler... -
Page 10: Troubleshooting
. Refer to the accompanying actuator assembly drawing for lubricants, sealants and torque values . Samplers, controllers and associated equipment can be inspected by Sentry Equipment and rebuilt if required . Please send your sampler to the company, and recommendations and prices will be provided promptly after receipt and inspection . - Page 11 ƒ Secure a qualified technician to run a complete operating check of timing circuits, remote contact inputs and/or counter inputs that sequence the electric or pneumatic power valve If any issues persist, please contact Sentry Equipment . ISOLOK SAL-Q Sampler...
-
Page 12: Parts & Accessories
Parts & Accessories Sentry Equipment recommends on-hand stocking of the following items in a quantity adequate for one or more years of normal operation . Most parts are available for immediate shipment and are confirmed upon request . Stock Parts... -
Page 13: Standard Warranty
4000-F40-300 Standard Warranty Sentry Equipment Corp (“Seller”) warrants products manufactured by it and supplied hereunder (“Products”) to be free from defects in workmanship and, to the extent materials are selected by Seller, to be free from defects in materials, in... -
Page 14: Customer Support
ƒ Field Service & Retro ts—When a problem needs immediate attention. ƒ Replacements Parts & Consumables—Order your replacement parts and consumables. ƒ Sentry ProShield Services – select from four ProShield Guardian service plans providing di erent levels of support to protect your large system investments with regularly scheduled maintenance. - Page 15 This page is intentionally left blank . ISOLOK SAL-Q Sampler...
- Page 16 Serving customers in more than 50 countries across six continents worldwide. sentry-equip.com 966 Blue Ribbon Circle North, Oconomowoc, WI 53066 U.S.A. | +1-262-567-7256 | support@sentry-equip.com...