Detachments - Toshiba MMC-UP0181HP-UL Service Manual

DANGER
Before carrying out the repair or removal
work, be sure to set the circuit breaker to
the OFF position.
Otherwise, electric shocks may result.
No. Part name
Air intake
1 1. Detachment
grille
1) Remove the screws of air intake grille
fixing knob on a side of each filter.
2) Slide the air intake grille fixing knobs
(two positions) toward the arrow
direction (OPEN), and then open the
air intake grille.
3) With the air intake grille open, hold the
hinge from above and below with one
hand and take out the air intake grille
with the other hand while gently
pushing it. (There are two air intake
grilles.)
Fixing knob
2. Attachment
1) Attach the hinge of air intake grille in
square hole of body.
2) Close the air intake grille, and then
fix it securely while sliding knob
closed side (CLOSE).
3) Fix the screws of air intake grille
fixing knob on a side of each filter.
Electric parts 1. Detachment
2
1) Loosen the screw of the electric parts
box cover
box cover.
(Ø5/32''(4mm) x 0.4''(10mm), 2 pcs.)
2) The electric parts box cover is moved
to fan motor side and it removes. The
electric parts box cover screw fixation
part is U character structure.
2. Attachment
1) Shut while inserting the electric parts
box cover in the interior side of the
electric parts box.
2) Fix the electric parts box cover by
tightening with screws.
(Ø5/32''(4mm) x 0.4''(10mm), 2 pcs.)

12. DETACHMENTS

Procedure
Hinge
4 4
- 106 -
CAUTION
Be sure to put on the gloves at
disassembling work; otherwise an injury
will be caused by a part, etc.
Remarks
Hinge
Air intake grille Air intake grille
fixing knob
Electric parts box cover
Fixing screws (2 pcs.)