Configuring The Sdk With Nds For J2Me 1.0 Through Jbuilder - Nokia 3510i User Manual

Configuring JBuilder to Recognize Nokia 3510i MIDP SDK
If you have already installed the SDK but did not install it in the above directory, you can copy
the entire the SDK directory structure to this directory.
To make the SDK the active device emulator within J2MEWTK:
1 Choose Tools>Configure JDKs. Select the J2ME Wireless Toolkit 1.04_01 JDK in the left
panel. Click the Micro tab in the right panel, as shown below:
2 The SDK should appear as an option in the Target Device drop-down list, as shown below:
3 Select the SDK from the drop-down list to make it the active emulator

Configuring the SDK With NDS for J2ME 1.0 Through JBuilder

To configure the SDK With NDS for J2ME 1.0 Through JBuilder:
1 When you install NDS v1.0 for J2ME, choose the Integrated with Borland Jbuilder
option at the beginning of the installation program.
Nokia 3510i MIDP SDK User's Guide
15