Configuring Jbuilder To The Sdk With J2Me Wireless Toolkit - Nokia 3510i User Manual

Hide thumbs Also See for 3510i:

Table of Contents

3 In Runtime Properties (shown below), configure the runtime parameters to be used when

your MIDlet starts on the SDK:.

• Ensure that the SDK is selected in the Emulator Device drop-down list.

• Enter a runtime parameters in the Emulator parameters text-entry box. See the

section titled "About Parameters" for a description of all available the SDK command

parameters.

4 In Runtime Properties, do one of the following:

• Click Main class and then click the adjacent button to display the Choose Main class

to run dialog box. In this dialog box, navigate to the location of the files of your main

class. Click OK.

• Click JAD file and then click the adjacent button to display the Choose JAD file to

run dialog box. In this dialog box, navigate to the location of the JAD file for your

MIDlet. Click OK.

5 In JBuilder, click Run project (or press F9) to run the project. You will see the MIDlet

execute in the SDK.

Configuring JBuilder to the SDK With J2ME Wireless Toolkit

J2ME Wireless Toolkit Version (J2MEWTK) is automatically installed when you install

MobileSet. Some MIDlet developers may wish to configure the SDK with J2MEWTK in order

to have the SDK appear in J2MEWTK's list of supplied emulators.

The easiest way to configure the SDK for this purpose is to install the SDK in the following

directory:

<JBuilder-install-directory>\J2mewtk\wtklib\devices

Nokia 3510i MIDP SDK User's Guide

Configuring Nokia 3510i MIDP SDK With IDEs

Table of Contents