Nt5K19 - Analog Tie Trunk Card; Functional Description; Trunk Types Supported - Northern Telecom NT5K17 Description

NT5K19 — Analog Tie trunk card

Functional description

Trunk types supported

United Kingdom United Kingdom United Kingdom
United Kingdom United Kingdom United Kingdom
The NT5K19 Analog Tie trunk card provides the interface between a trunk
facility and either an NT8D37 Intelligent Peripheral Equipment module
(IPE) or NT8D11 Common Equipment/Peripheral Equipment (CE/PE)
module.
The NT5K19 Analog Tie trunk card can be installed in any PE slot in an
NT8D37 IPE module or NT8D11 CE/PE module. Up to sixteen cards can
be installed in one NT8D37 IPE module. The NT8D11 CE/PE module can
hold up to ten NT5K19 Analog Tie trunk cards.
Refer to the "UK Analog Hardware Support" feature to assist in
configuring the NT5K19 circuit card. This feature is described in Features
and Services for Generic X11 Supplementary Features Appendix 2 to 553—
2311—105.
The NT5K19 Analog Tie trunk card supports four analog trunks. Each
trunk circuit can be individually configured as:
• 4-wire E&M Type 1 Tie trunk (DC5)
• 2-wire E&M Type 1 Tie trunk (DC5)
• 2280 Hz Tie trunk (AC15)
• Recorded Announcement trunk (RAN)
• Music trunk (MUS)
• Paging trunk (PAG)
• Emergency Recorder trunk (RCD).
UKTrunk cards description 553-3001-173
3-1